SH Separating Handler with
"Pin or Textured Belt"
Designed to work in tandem with MAC series conveyors. Units are designed to accept the overall width of the SF series, this design allows the frame to get tremendously close to the separator for tight tolerances. The following are the lengths and widths offered. Included is a T-type steel telescoping stand, standard AC fixed speed parallel shaft gear-motor. Unit has adjustable angle from 0- negative 45 degrees. Your choice of pin heights 1-1/8" tall and 2" tall. Belt material is White Polyurethane with stainless staple lace, holes are punched on 1" centers on a staggered pattern. Pins have a shoulder to hold place in the belt, but the pins easily removed to be repositioned for different patterns. A textured, white polyurethane belt with chevron pattern and an endless splice is available for applicable runners and parts.
- Lengths:1'(actual 16" long ), 2'(actual 28" long ), 3'(actual 40" long ), 4'(actual 52" long)
- Widths: 9", 13", 15", 21", 27" between frame width
- T-leg set is adjustable from 18-30"
- Options: AC adjustable speed drives, In-feed and discharge chutes, Connect to conveyor leg set.
Contact our Customer Service Team at 800-435-6979