Custom Quotes Available!

Horizontal to Incline Steel Conveyor:

Used for light to medium weight, finished part applications. This conveyor is ideally suited for under-the-press or bedside the press applications to remove parts from under the machine or transition from another conveyor and elevate up to another piece of equipment or discharge for inspection or assembly. The angle of incline is adjustable from 20-60 degrees for elevation changes. The fully welded frame construction of this model produces a solid square frame for industrial use.

Exclusive Series Features:

Frame: Formed C-channel steel frame with welded cross members
Castings: Supports bearings and pulleys, featuring a unique design for easy service and belt tracking adjustments
Side Rail Overlaps: Recessed belt edges, .625" per side on 18" width or less, and 1.625 on 24" and 30" wide
Pulleys: Feature a machined trapezoidal crowned on head and tail which provides increased tracking signal
Motor Starter: Includes manual push button with thermal overload
Hole Patterns: Pre-punched pattern on bottom of frame for repositioning leg supports along the frame length
Warranty: Two year limited.

Specifications

Lengths available: 5' to 15' lenght increments on 1'lengths
Widths: 6" to 30" on 6" increments

Techincal Information:

Frame:	2.63” height, 13 gauge welded C channel steel frame fabricated with welded steel tubular cross members, optional steel slider bed for support. Incline frame section is adjustable from 20-60 degrees.
Side Rails:	5” extruded aluminum side rails without top return, overlap is .625” per side, or 1.625” per side on 24” and 30” wide models. Belt widths greater 18” have a R16, 3.5” tall stainless steel rail as a standard.
Belt:	2 ply white FDA Approved P.U. cover, Anti-Static with ¾” cleats welded on 15” centers, splice is endless bias angle skive type.
Belt Widths:	6”, 12”, 18”, 24”, 30”, 36”.
Length:	Combined Lengths to a max. of 15’ (2’ min on drive) and (2.5’ min. on take-up end), manufactured in 1’ increments (standard)
End Drive:	Located at in-feed end, M1, M2, are standard M9, M10, M11, M12 are available at no charge. Side drive positions M5, M6 are available. Positions M3, M4, M13, M14, M7, M8 are available if applicable (please consult factory) Standard drives are 120VAC/1/60 HZ motors.
Speeds:	22 FPM (standard), 45, 67, 133 FPM - available at a nominal charge.
Pulley:	3” Drive & tail pulleys are both machined with trapezoidal crowns, shafts are 5/8” diameter and bearings are sealed self-aligning type, no lubrication required. Drive pulley is fully lagged.
Take-up Assembly:	Allows for 2.5 inches of take-up of belt adjustment.
Electrical Control:	NEMA 1 enclosure with push button manual motor starter with thermal overload protection and 12’ of SJ 16/3 cord with plug for 120VAC input power as standard.
Supports:	Steel telespar type supports, LS2 series included with CA3 (4” diameter swivel toe locking casters) Elevation is 11.9”-16.9” top of belt to floor with cleats up to 30 mm tall.
Paint:	MAC metallic Silver (other colors available as options)

Common Options

Drive Motor Location: Motor locations for special elevation requirements or functions.

Variable speed drives: AC and DC type variable speed drive packages for different input voltages.

Belts: Wide selection of various belt materials, cleat heights, spacing, and V-guides.

Reversing Packages: Automatic processing reversing control packages.

Indexing Packages: Automatic belt indexing packages.

Side rails: Alternative side rail height and materials.

Covers for Top of Conveyors: Polycarbonate & stainless steel covers.

Covers for Bottom of Conveyors: Bottom covers- painted steel and stainless steel.

Conditioning Units: Ambient air blowers and chilled water fed cooling blowers.

Many others…

Home I Products I Conveyors I Custom Quotes I Contact Us