Conveyors

Custom Quotes Available!


Heavy Duty Conveyor:

The “Heavy Duty” belt conveyor is a profile that is used for heavy weight finished part applications. This conveyor is ideally suited for under-the-press application of large sized injection molding machines, general-purpose large heavier weighted parts. Also, used for assembly, inspection, and case conveying. The fully welded construction of this model produces a solid square frame for industrial use..

Exclusive Series Features:
  • Frame: Formed C-channel steel frame with welded cross members.
  • Castings: Support bearings and pulleys featuring a unique design for easy service and belt tracking adjustments
  • Side Rail Overlap: Recessed belt edges - .335” per side, provide tight belt to rail tolerance
  • Pulleys: Feature a machined trapezoidal crown on head and tail, which provides an increased tracking signal.
  • Bearings: Four bolt flange bearings with external grease fittings
  • Motor Starter: Includes manual push button motor starter with thermal overload
  • Hole Pattern: Pre-punched pattern on bottom of frame for repositioning leg supports along the frame length
  • Warranty: Two year limited

Specifications

Lengths available: 4’ to 50’ lengths increments on 1’ lengths
 Widths: 6” – 48” on increments
Note: Special widths on 2” increments and special lengths on 6” increments are available.
Technical Information:
Frame: 4.25” height, 12 gauge welded C channel steel frame fabricated with welded steel tubular cross members and full steel slider bed for support.
Side Rails: 2.5” extruded aluminum side rails with top return, overlap is .35” per side.
Belt Widths: 6”,12”,18”,24”,30”,36”, 42”, 48”.
Length: 4’ to 50’ on 1’ increments (standard).
Side Mount End Drive: Located at any one of the four corners, dependent upon length and application. Positions M7,M8, are preferred, M5,M6 are available if applicable. Standard drives are 120VAC/1/60 HZ motors, other voltages and phases available-consult factory.
Speeds: 30 FPM (standard), 45, 60, 80 FPM are available at a nominal charge.
Pulley: 4” diameter drive and tail pulleys are both machined with trapezoidal crowns, shafts are 1” diameter bearings are 4 bolt flange type, self-aligning, with grease fittings for ease of service.
Take-up Assembly: Allows for 4 inches of take-up of belt adjustment.
Electrical Control: NEMA 1 enclosure with push button manual motor starter with thermal overload protection and 12’ of SJ 16/3 cord with plug for 120VAC input power as standard.
Supports: Various telescoping legs, steel constructed with adjustable heights available.
Paint: MAC metallic Silver (other colors available as options)

Common Options

Casters: Two-way, toe locking swivel casters with 5” diameter polyurethane wheels.

Variable speed drives: AC and DC type variable speed drive packages for different input voltages.

Belts: Wide selection of various belt materials and surface textures.

Reversing Packages: Automatic processing reversing control packages.

Indexing Packages: Automatic belt indexing packages.

Side Rails: Alternative side rail height and materials.

Covers for Top of Conveyors: Polycarbonate & stainless steel covers.

Covers for Bottom of Conveyors: Bottom covers – painted steel and stainless steel.

Conditioning Units: Ambient air blowers and chilled water fed cooling blowers cooling blowers

Many others…..