Conveyors

Custom Quotes Available!



The Horizontal to Incline to Horizontal Conveyor comes in both Aluminum and Steel. The images to the left is of an aluminum HIH.
Horizontal to Incline Steel Conveyor:

The “Horizontal to Incline to Horizontal Aluminum” belt conveyor series is a profile that is used for light - medium weight finished part applications, where cleanliness and appearance are important. This conveyor is ideally suited for under the press or beside the press applications to remove parts from under the machine or transition from another conveyor and elevate up to an other piece of equipment or discharge for inspection or assembly. The angle of incline and the discharge horizontal sections are adjustable from 20-45 degrees for elevation changes. The models uperior construction produces a solid square frame for industrial use.


Exclusive Series Features:
  • Frame: Extruded aluminum frame, 6061 aluminum with T5 temper, clear anodized.
  • Cross Members: Steel cross members for exceptional torsional ridgitity
  • Castings: Supports bearings and pulleys featuring a Unique take-up design, tracking done at all four corners
  • Side Rail Overlap: Recessed belt edges .75” per side up to 18” widths or less and 1.75” per side on 24” and 30” wide
  • Pulleys: Feature a machined trapezoidal crown on head and tail, which provides increased tracking signal
  • Bearing assemblies: Set in castings with covers, no exposed rotating parts
  • Belt edge wear strips: Wear strips on top and return sides, less wear on convey and return sides
  • Warranty: Two year limited

Specifications

Lengths available: 6’ to 15’ lengths (combined) increments on 1’ lengths
 Widths: 6”-30”on increments

Note: Special widths on 2” increments and special lengths on 6” increments are available.
Techincal Information:
Frame: 2.63” extruded frame with welded steel tubular cross members, optional steel slider bed for support across full width.
Side Rails: 5” extruded aluminum side rails without a top return, overlap is .75” per side or 1.75” per side on 24” and 30” wide models. Belt widths greater than 18” have R16, 3.5” tall stainless side rails.
Belt: 2 ply white FDA Approved P.U. cover, Anti-Static with ¾” cleats welded on 15” centers, splice is endless bias angle skive type.
Belt Widths: 6”, 12”, 18”, 24”, and 30”.
Length: Combined lengths of 15’ (2’ min. on drive end) and (2’ min. on idle end) Manufactured on 1’ increments (standard)
End Drive: Located at discharge end, M3, M4 preferred. Side drives M7, M8 are available. Positions M1, M2, M5, M6 are available if applicable, (please consult factory) Standard drives are 120VAC/1/60 HZ motors.
Speeds: 22 FPM (standard), 9.5, 14.5, 32, FPM - available at no charge
Pulley: 2.125” drive and tail pulleys are both machined with trapezoidal crowns, with machined V-guided grooves, drive pulley is fully lagged, shafts are 3/4” diameter and bearings are sealed self-aligning type. Drive pulley is lagged with ruff top material.
Take-up Assembly: Allows for 2.5 inches of take-up of belt adjustment.
Electrical Control: NEMA 1 enclosure with push button manual motor starter with thermal overload protection and 12’ of SJ 16/3 cord with plug for 120VAC input power as standard.
Supports: Extruded aluminum telespar type supports, LSA2 series included are CA3 (4” diameter swivel toe locking casters). Elevation at in-feed end is 13.2” –19.2” adjustable from top of belt to floor with cleats up to 30 mm tall.

Common Options

Drive motor locations: Available for different elevations or functions.

Variable speed drives: AC and DC type variable speed drive packages for different input voltages

Belts: Wide selection of various belt materials, cleat heights, spacing

Reversing Packages: Automatic processing reversing control packages

Indexing Packages: Automatic belt indexing packages

Side Rails: Alternative side rail height and materials

Covers for Top of Conveyors: Polycarbonate & stainless steel covers

Covers for bottom of Conveyors: Bottom covers in painted steel and stainless steel

Conditioning Units: Ambient air blowers and chilled water fed cooling blowers

Many Others – Please inquire